ES-1 edge systems, installed in order
Each sequence follows Drexel Metals' published installation guide for one ES-1 edge system that AFS fabricates as an authorized Drexel fabricator: the lettered parts, every step, the fasteners exactly as printed, and a field checklist you can print.
This sequence follows Drexel Metals' published installation guide for the system. The project's specifications, the approved shop drawings and the roofing membrane manufacturer's requirements govern; where they differ, follow them and ask AFS.
Copings
Snap Coping-Max
16 Ga Galv. Intermittent Cleat, Snap-On Cover
4 steps · 12" Face Max; 32" Wall Max; 6" Back Max
Snap Coping-Max-C
16 Ga Galv. Segmented Cleat w/Spring Clip, Snap-On Cover
4 steps · 12" Face Max; 32" Wall Max; 6" Back Max
Econo Coping LT
24 Gauge Formed Cont Cleat; (Front Face) Exposed Fastener; (Back Face) Drip Profile
4 steps · 6" Face Max; 24" Wall Max; 5.5" Back Max
Econo Coping
22 Gauge Formed Cont Cleat; (Front Face) Exposed Fastener; (Back Face) Drip Profile
4 steps · 6" Face Max; 20" Wall Max; 5.25" Back Max
Fascia
Gravel stops
Drip edges
Gutters
AFS fabricates the Drexel ES-1 edge systems above. Drexel's GT-1 gutter systems are not listed here because AFS is not certified to fabricate them.