FlashChat

Industry Intelligence

The most knowledgeable architectural sheet metal AI assistant in the industry. Trained on Division 7 standards, SMACNA specifications, material science, and decades of Texas fabrication expertise.

No account required. Ask anything.

What FlashChat Knows

Division 7 Standards

Complete coverage of CSI MasterFormat Division 07 — Thermal and Moisture Protection. Sections 07 60 00 through 07 90 00 including Sheet Metal Flashing (07 62 00), Roof Specialties (07 71 00), and Joint Protection (07 90 00).

SMACNA Specifications

Fabrication standards, seam types, expansion provisions, installation requirements, and material specifications from the SMACNA Architectural Sheet Metal Manual — the industry reference standard.

Material Science

Copper (16oz-24oz), aluminum (.032-.063"), galvanized steel (G-90), stainless steel (304/316), lead-coated copper, and zinc. Service life, thermal expansion, galvanic compatibility, and application guidance.

Profile Knowledge

Every AFS profile: coping caps, base flashing, counter flashing, gravel stops, drip edge, gutters, scuppers, reglets, Z-bars, hip/ridge caps, inside/outside corners, expansion joints, and custom profiles.

Installation Standards

End lap requirements, thermal expansion allowances, dissimilar metal isolation, sealant compatibility, wind uplift design, fastening patterns, slope requirements, and common failure mode diagnosis.

Texas Expertise

Regional guidance for Central Texas climate — heat expansion in Hill Country summers, coastal considerations for Gulf Coast projects, windstorm compliance for TDI-regulated construction, and local material availability.

Ask FlashChat Anything

Real questions. Expert answers.

Built on Real Expertise

FlashChat is powered by Architectural Flashing Supply — a precision sheet metal fabrication shop in Burnet, Texas. Our knowledge base is built on SMACNA standards, NRCA guidelines, ASTM material specifications, and decades of hands-on fabrication experience.

(512) 372-4900 | info@architecturalflashingsupply.com

For formal quotes and engineering decisions, always consult AFS directly.

FlashChat provides general industry knowledge for informational purposes. It does not constitute engineering advice. Always verify specifications with a licensed professional for your specific project conditions.