Detail Atlas · Wall & Counter Flashing
Apron Flashing with Seal Kick
The FlashDraft section for this condition, in 3D and as a lettered section.
Show
Loading 3D view…
Legs
| Leg | Length |
|---|---|
| A | 1/2" |
| B | 2" |
| C | 3-1/2" |
This section has a hem. The DXF draws it on its own layer; Open in FlashDraft carries it with the section.
Related calculators
- Flashing Profile & Bend Development - Legs, bends and hems to a blank width, bend schedule, weight and an AFS fabrication check.
- Material Takeoff & Nesting - Pieces into 10 ft strips and 48 in sheets, utilization and weight, ready to send to AFS.
- Thermal Movement & Compatibility - Expansion and contraction of a run between metal temperature extremes, and dissimilar-metal screening.
Drexel ES-1 systems with this section
No Drexel ES-1 system AFS fabricates uses this section. Ask AFS about tested assemblies for this condition.